Smarty SSR Performance Tuner For Dodge Ram | Cummins 5.9l | 2003-2007

Fast guide to Smarty SSR software levels

No need for a PC. No need to know about binary code. No need to
spend countless hours on a complicated software.
No need to become a software engineer to fine tune your truck!
The SSR delivers the right combination of performance parameters to
fully customize your engine. No matter what modifications you have
done to it!
Whatever race and class you want to compete in, the SSR has the
answer!

How it works
The SSR provides just one base performance software that takes care
of all the limiting factors like the speed / RPM / Torque & boost limiters.
Then you will need to fine tune the
injection duration, injection timing & rail pressure to the truck’s needs.
The three most critical performance parameters in a Diesel engine!
In order to allow the complete customization of the performance
software to the particular engine’s needs, the SSR provides 50 levels
each for the following parameters:

1) Low Load injection Timing ( LLT )
2) High Load injection Timing ( HLT )
3) Low Load injection Duration ( LLD )
4) High Load injection duration ( HLD )
5) Low Load Rail Pressure ( LLRP )
6) High Load Rail Pressure ( HLRP )

All you need to do is to select the tuning parameters that match your
truck best, voilà.

Power on Demand
100 power levels selectable in just one second during the driving!
It’s easy: just type the preferred power level directly on Smarty
keyboard, from 00 to 99.  That’s all!
For security reason, the truck waits that the throttle is released before
applying the new power level.

No trace is left in the ECM!
I herby CLAIM that Smarty is the FIRST AND ONLY downloader that
does not erase any of the stored data in the ECM. Smarty does NOT
leave any electronic footprints in the ECM or any other electronic
module in the truck. Smarty does NOT set ANY codes once the ECM is
set back to stock. Smarty does NOT need to have fuses pulled.

No matter what the competition claims , in one way or another they’re
ALL detectable.
Smarty is NOT!

Yet, Smarty can not do one thing for you. Fix what others have
broken. Smarty can not restore a key on counter that another
downloader has erased . Smarty can not fix VIN# troubles caused by
other products. If your Check engine / ABS light is on because another
product has screwed your ECM, Smarty can not fix it, the other guy
HAS to…

ABS / Speedo recalibration
The tire height can be adjusted up to 44″ in increments of 10 tenth of
an inch in just a couple seconds. Of course, Smarty needs to be VIN#
locked to the truck in order to get into the ABS adjustment section.

DTC Code reader
The name says it all.
You can read and erase codes. Codes are displayed also in plain
English. That’s old news by now. Smarty S-03 was the first one to
provide that utility, others found the idea to be a good one too.  
( Smarty does erase ABS codes too but does not display them )

ECM update speed
Faster than anything else on the market! Again we’ve done our
homework on the protocol. Less than 5 minutes. Three times faster
than a Star-Scan diagnostic tool or competitor.

We have developed our own bootloader in order to not have to pull
fuses should an update become interrupted for any reason. All you
have to do is to turn the key off / key on Smarty does everything else
on it’s own.

Updates
The CaTCHER softwares as they are today are only a starting point.
Expect major news in future. We’re for your feedback, opinions, likes,
dislikes…
We will make Smarty do what YOU want, TOGETHER.